To print with white ink on a dark or transparent substrate, the file has to meet these conditions:
- Without white, the colour is lost in the substrate: it darkens on kraft or dark board and turns see-through on vinyl or acrylic.
- White is used in two ways: as a colour (spot white) or as an underbase beneath the colour, so that the colour looks as it would on white paper.
- Everything that carries white goes on a “Blanco” (white) layer, filled with a spot colour of the same name.
- That layer is vector, at 100 % of the spot colour and set to overprint. No gradients, transparencies or screens.
- If the white is an underbase, its shape matches the colour that goes on top: neither larger nor smaller.
- An element in CMYK white (0 % of everything) does not print: the substrate shows through.
- If the piece will be seen from behind glass, tell us when you order and we will tell you how to supply the file.
- On a dark substrate, the white is not as pure as the white of paper.
We offer white ink in digital and large-format printing, on dark or transparent materials. The rest of the file follows the usual rules: bleed, CMYK, resolution and fonts, which are covered in the guide How to prepare a file for printing. Here we only explain what changes when the piece includes white.
1. Why do you need white ink on a dark or transparent substrate?
Because colour inks are translucent and let whatever is underneath show through. On white paper, that “underneath” is white and the colours come out as they do on screen. On any other substrate, the colour mixes with that of the material:
- On kraft or dark boards, colours become dull and shift towards the tone of the substrate. A yellow on kraft loses its vibrancy and turns brownish; on black board, it is barely visible.
- On transparent materials, such as clear vinyl, a clear adhesive or acrylic, the colour looks like stained glass: light passes through it and it loses strength.
- The white in the design does not exist. Four-colour process printing has no white ink: where the design is white, nothing is printed and the substrate shows.
White ink solves both problems: it prints white as one more colour and creates an opaque base so that the colours on top look clean.
2. What is the difference between spot white and underbase white?
Spot white is a colour in the design; underbase white is a layer you do not see, beneath the colour, so that the colour is not lost in the substrate. The same piece can have both.
| Use | What it is | Example | How it goes in the file |
|---|---|---|---|
| Spot white | White is the final colour of the element | A white logo on a black board business card | Only on the “Blanco” layer, with nothing on top |
| Underbase white | A layer of white beneath the colour | A full-colour illustration on a kraft label | On the “Blanco” layer, with the same shape as the colour on top |
| No white | The colour is printed directly on the substrate | Black text on kraft | Only in the CMYK design |
Full or selective white. The underbase can go beneath just some elements (selective) or cover the whole printed area (full). With a selective underbase, anything without a base mixes with the substrate, and sometimes that is exactly the point: dark text on kraft reads well and lets the texture of the material show.
3. How do you prepare the white layer in the file?
With a separate layer called “Blanco” and a spot colour with the same name. It is the same method we use for varnish and foil stamping, which we explain step by step in the guide to spot UV varnish and foil stamping.
- A “Blanco” layer, above the design layers.
- A “Blanco” spot colour. Everything on the layer is filled with it. The colour it shows on screen does not matter: choose one that stands out clearly from the design, such as a light cyan or a magenta.
- Vectors only, at 100 %. Shapes, paths and text converted to outlines. No gradients, transparencies, shadows or screens: the white underbase is either there or not, and 50 % turns into a dot screen.
- Set to overprint. Set the objects on the layer to Overprint Fill and, if they have a stroke, Overprint Stroke. We explain this in section 4.
If the white is an underbase: its shape matches the colour
- Copy the path of the colour element and paste it onto the “Blanco” layer in the same position. If you redraw it by hand, it never quite matches.
- Do not enlarge it. A white larger than the colour peeks out as a thin white line around the element.
- If the colour reaches the edge, the underbase reaches it too and continues into the bleed, just like the colour.
- Photos and illustrations: the underbase is the outline of the image. If it is a cut-out (a product with no background, for example), draw the outline of the cut-out; if it is rectangular, a rectangle of the same size is enough.
If the white is spot white: only on the “Blanco” layer
Text or a logo that has to come out white is filled with the “Blanco” spot colour and goes only on that layer, with no colour in the design beneath or above it. Do not leave it as CMYK white in the design: that white does not print.
A trick to preview the result on screen. On a lower layer, place a rectangle in the colour of the substrate (kraft, black, grey) to see how the design will look. Delete it before exporting: a hidden layer can reappear when printed.
4. Why does the “Blanco” layer have to be set to overprint?
Because otherwise the object on top knocks out the one underneath and one of the two is lost: the colour or the underbase. By default, when one object sits on top of another, the software removes the one below (a “knockout”). The “Blanco” layer is above the design, so without overprint the colour in that area would disappear and only the white would print.
With overprint turned on, the “Blanco” layer and the colour coexist: the file says where the white goes and where the colour goes.
How to check it: in Separations Preview, the “Blanco” plate must show the complete shape, and when you hide it the CMYK design must remain intact, with no gaps. The Illustrator and InDesign menus are in the section How do I check the file of the varnish and foil stamping guide: replace “Barniz” (varnish) with “Blanco”.
5. How do I export the PDF so the white is kept?
Without converting spot colours to process and with overprint intact. If they are converted, the white is lost: the “Blanco” spot colour becomes CMYK white, which does not print.
- In the Ink Manager of the export dialog, leave All Spots to Process turned off.
- Turn on crop marks and 3 mm of bleed, as with any other job.
- Ask us about the exact PDF/X format: for jobs with special inks, it depends on the job.
- Then open the PDF in Acrobat and check Output Preview: the “Blanco” ink must appear in the list, separate from CMYK.
The full steps are in the section How do I export the PDF of the varnish and foil stamping guide.
If you design in Canva: Canva cannot create spot colours or technical layers (we cover this in the file preparation guide). Send us the design and tell us what goes in white and what needs an underbase; we will work out with you how to prepare that layer from it.
6. What if the piece is seen from behind glass?
Tell us when you order and we will tell you how to supply the file. This happens with clear vinyls and adhesives applied to the inside of a shop window or a glass partition and read from outside: the piece is viewed from the side opposite the printed one, and that changes how it is prepared.
Prepare the design as passers-by will see it and tell us where it will be placed. If part of it has to be seen from both sides, let us know as well.
7. What result can I expect from white on a dark substrate?
A white that is not as pure as that of white paper. On a dark or coloured substrate, white ink covers well, but the substrate can be faintly seen underneath: the white comes out slightly duller.
- Colours on an underbase look clean, but not as bright as on white coated paper.
- Fine text and lines in white on a dark background tend to fill in. Use regular or heavier weights and do not go below the minimum line widths in the file preparation guide.
- On transparent materials, without an underbase the colour lets light through; with one, it blocks it. Choose depending on whether you want the piece to be seen against the light or not.
If colour is critical, for example a corporate colour, ask for a proof on the actual substrate before the print run.
What about silver ink? In digital printing we also work with silver ink. What can be achieved depends on the design and the substrate, so ask us before preparing the file.
8. What are the most common mistakes?
| Mistake | What happens | How to avoid it |
|---|---|---|
| Elements in CMYK white (0 % of everything) | They do not print: the substrate shows | Fill them with the “Blanco” spot colour on its layer |
| Colours without an underbase on a dark substrate | They come out dull or are not visible | Add a white underbase with the same shape as the colour |
| The “Blanco” layer is not set to overprint | The colour in that area disappears | Overprint fill and stroke; check with Separations Preview |
| The underbase is larger than the colour | A thin white line peeks out around it | Copy the path of the colour and paste it in the same position |
| Gradients, transparencies or screens on the layer | White has no halftones: it comes out with a ragged edge or as dots | Flat shapes at 100 % |
| White made with a pixel image | Jagged edges | Vectors only; text converted to outlines |
| Spot colours converted to process on export | The “Blanco” layer disappears from the PDF | Turn off “All Spots to Process” |
| Not mentioning that the piece is seen from behind glass | The piece does not look as expected from outside | Tell us when you order |
| Leaving the substrate-coloured rectangle in the file | It prints as an extra background | Delete it before exporting |
Frequently asked questions
Which materials can be printed with white ink?
Dark or transparent materials, in digital and large-format printing: for example, kraft and dark boards, clear vinyl and adhesive, or acrylic. If you have a specific substrate in mind, ask us.
Do I need white to print on kraft?
It depends on the effect you are after. Black text or a dark colour reads well without white and lets the texture of the kraft show. A light colour or a photo needs a white underbase so it does not come out dull.
How do I show in the file which parts are white?
With a “Blanco” layer and a spot colour of the same name, in vector, at 100 % and set to overprint. Whatever is on that layer prints in white; whatever is not, does not.
Does the white look the same as white paper?
Not quite. On a dark substrate, the white is slightly less pure and the colours on top slightly less bright. If colour is critical, ask for a proof on the actual substrate.
Can I print in silver?
In digital printing, yes, we work with silver ink. The result depends on the design and the substrate: ask us before preparing the file.
What happens if my file does not have the white layer prepared?
Before production we check its technical specifications. If the “Blanco” layer is missing or not properly defined, we tell you what is missing and work out with you how to solve it.